Multifunctional Zn0.3Al0.4O4.5 crystals: An efficient photocatalyst for formaldehyde degradation and EBT adsorption

The Zn_0.3Al_0.4O_4.5 nanoparticles (ZnAlONPs) with size of 70–90 nm are used as an efficient photocatalyst for formaldehyde (HCHO) degradation and effective adsorbent for the removal of eriochrome black-T (EBT) dye from synthetic aqueous solution. Degradation of HCHO reactions were studied using TiO₂ (homemade), TiO₂ (P-25) and ZnAlONPs by irradiating under 18 W daylight lamp source for photocatalytic degradation. The HCHO degradation rate is about 67, 76 and 89% for TiO₂ (homemade), TiO₂ (P25) and ZnAlONPs during 2 h reaction, respectively at initial formaldehyde gas concentration of 20 ppm. Maximum adsorption capacity was optimized by changing the parameters such as pH, EBT concentration and adsorbent dosage. A  200 mg of ZnAlONPs are useable for quick removal of EBT (>95%). Langmuir isotherm model showed a maximum adsorption capacity of 90.90 mgg⁻¹. The ZnAlONPs could be successfully reused upto 5^th adsorption/desorption cycle for EBT dye removal from water samples.     

Stabilities,Electronic Structures,and Bonding Properties of Iron Complexes (E1E2)Fe(CO)2(CNArTripp2)2 (E1E2=BF,CO, N2, CN−, or NO+)**

The coordination of 10-electron diatomic ligands (BF, CO N₂) to iron complexes Fe(CO)₂(CNAr^Tripp2)₂ [Ar^Tripp2=2,6-(2,4,6-(iso-propyl)₃C₆H₂)₂C₆H₃] have been realized in experiments very recently (Science, 2019 , 363, 1203–1205). Herein, the stability, electronic structures, and bonding properties of (E₁E₂)Fe-(CO)₂(CNAr^Tripp2)₂ (E₁E₂=BF, CO, N₂, CN⁻, NO⁺) were studied using density functional (DFT) calculations. The ground state of all those molecules is singlet and the calculated geometries are in excellent agreement with the experimental values. The natural bond orbital analysis revealed that Fe is negatively charged while E₁ possesses positive charges. By employing the energy decomposition analysis, the bonding nature of the E₂E₁–Fe(CO)₂(CNAr^Tripp2)₂ bond was disclosed to be the classic dative bond E₂E₁→Fe(CO)₂(CNAr^Tripp2)₂ rather than the electron-sharing double bond. More interestingly, the bonding strength between BF and Fe(CO)₂(CNAr^Tripp2)₂ is much stronger than that between CO (or N₂) and Fe(CO)₂(CNAr^Tripp2)₂, which is ascribed to the better σ-donation and π back-donations. However, the orbital interactions in CN⁻→Fe(CO)₂(CNAr^Tripp2)₂ and NO⁺→Fe(CO)₂(CNAr^Tripp2)₂ mainly come from σ-donation and π back-donation, respectively. The different contributions from σ donation and π donation for different ligands can be well explained by using the energy levels of E₁E₂ and Fe(CO)₂(CNAr^Tripp2)₂ fragments.     

A refined numerical model for determining inflation-burst behavior of composite membrane structures

The airship structures made of multi-layer composite fabrics or membranes can offer the platform for earth observations, wireless communications and space research due to light weight and good mechanical performance. The structural safety and serviceability strongly depend on material properties and working conditions. Available studies are limited within service stress limits or are lack of suitable biaxial tensile constitutive models for understanding structural behavior. This paper thus focuses on a refined numerical model for determining inflation-burst behavior of composite airship structures considering new biaxial constitutive equations, novel failure criteria and manufacture factors.The differences between ideal and real forms of airship structures, e.g. volume difference, demonstrate the necessity for incorporating cutting-pattern effects in the initial numerical model. For structural analysis, stress distributions on real structural forms are different from those on ideal forms because of welding parts that can enhance local stiffness. The ultimate pressures are 56.7 kPa and 59.5 kPa for ideal and real structural forms. Structural breaking initiated at the maximum diameter of ideal structural forms propagates fast while welding parts can prevent breaking propagation for real structural forms. Therefore, the refined numerical model can reveal basic structural behavior and safety performance of airship structures in the inflation-burst processes.     

Biobased PLA/NR-PMMA TPV with balanced stiffness-toughness: In-situ interfacial compatibilization,performance and toughening model

Using rubber to toughen polylactide (PLA) is always accompanied by the sharp reduction in stiffness. Herein, PLA/poly (methyl methacrylate) grafted natural rubber (NR-PMMA) thermoplastic vulcanizates (TPVs) with balanced stiffness-toughness were fabricated. With the addition of 40 wt % NR-PMMA, the impact strength and tensile toughness of PLA/NR-PMMA TPV significantly improved to about 102.7 kJ/m² and 66.1 MJ/m³, respectively, compared with those of 2.7 kJ/m² and 2.4 MJ/m³ for the pure PLA. Meanwhile, the yielding stress was maintained at 34.5 MPa. Fourier transform infrared spectroscopy (FTIR) confirmed the formation of in-situ interfacial compatibilization between PLA and rubber phases. Both tensile and impact toughening mechanism were studied and deduced as considerable energy dissipation provided by the continuous rubber phase. Instrumented notched impact tests demonstrated that the energy dissipating in crack propagation process contributed to the main part of impact toughness. In addition, a novel toughening model based on bicontinuous structure was incorporated, which showed good applicability in predicting the impact strength of PLA/NR-PMMA TPVs.     

Multiscale characterization and constitutive parameters identification of polyamide (PA12) processed via selective laser sintering

This study is focused on multiscale characterization and constitutive parameters identification of selectively laser sintered PA12 specimens. The process parameters and change in crystallinity due to 3D printing were identified via differential scanning calorimetry (DSC). Tension, compression, shear, flexural and fracture tests performed on samples fabricated, both in 0° and 90° directions reveal that the tensile toughness of samples printed in 0° orientation, outperform samples printed in 90° orientation by an average of 24%. Cryogenically fractured samples were analyzed via SEM and micro-computed tomography to analyze 2D/3D defects and correlate the microstructure with macroscopic properties. The constitutive parameters for a strain-rate and temperature-dependent Three Network (TN) material model were identified using the measured mechanical properties. Furthermore, mechanical response of micro-architected Kelvin lattice structure was analyzed by Finite Element Method employing the TN constitutive model and the predictions were corroborated with measurements.     

A five-parameter fractional derivative temperature spectrum model for polymeric damping materials

To capture viscoelastic behavior of polymeric damping materials based on limited dynamic mechanical analysis tests, a simple fractional temperature spectrum model representing the viscoelastic materials is proposed in this paper and experimental tests aims at stressing the validity of the model. The storage modulus, the loss modulus, and the loss factor, are established based on the five-parameter fractional derivative model and the time–temperature superposition principle. The dynamic mechanical tests of two polymeric materials are carried out to verify this temperature spectrum model. Results indicate a good agreement between the temperature spectrum model and experimental tests at various temperature conditions. Furthermore, thermodynamic coupling of the viscoelastic material is investigated by temperature rise calculation and vibration experiment test. Comparison analysis shows that the temperature rise model can simulate the temperature rise process for the shear vibration of the constrained damping, which provide references for the damping capability, thermal damage and failure of viscoelastic material.     

Effect of working temperature on the interfacial behavior of overmolded hybrid fiber reinforced polypropylene composites

In the present study, the interfacial behavior of overmolded hybrid fiber reinforced polypropylene composites (hybrid composites) in the working temperature range from 23 °C to 90 °C was studied by experimental and constitutive methods. Monotonic and cycle loading-unloading single-lap-shear tests were employed to determine the interfacial properties of hybrid composites. The experimental results show that both interfacial shear strength and shear stiffness decrease with increasing working temperature. A regression function was adopted to evaluate the decaying degree of interfacial properties with increasing working temperature. The shear stress-displacement relationship under monotonic loading exhibits nonlinear behavior after an initial elastic region. The envelope lines of shear stress-displacement of hybrid composites under cyclic loading indicate that the nonlinearity in the curve is caused by the plastic deformation of polypropylene in the interphase region. A constitutive model was built to describe the nonlinear shear stress-displacement relation of hybrid composites at different working temperatures. A full suite of temperature-dependent plastic parameters in the model was obtained from cyclic loading-unloading tensile tests. The predicted shear stress–displacement curves agreed well with experimental results from different working temperatures. In addition, the failure mode of hybrid composites varied with working temperature.     

线性响应和两种态特定方法模拟AF350电子跃迁的溶剂效应

在极化连续模型框架下比较了线性响应与两种不同态特定方法计算的溶液中Alexa Fluor 350(AF350)分子激发能和光谱移动值的差异. AF350的第一激发态S0→S1电子跃迁属于π→π^*跃迁, 主要对应于最高占据分子轨道(HOMO)到最低空轨道(LUMO)的跃迁. 该分子激发态偶极矩大于基态偶极矩, 激发态时溶质溶剂相互作用比基态时更强, 随着溶剂极性增大, 会发生光谱红移的现象. 与实验值相比, 线性响应和两种态特定方法均高估了激发能, 其中以IBSF(Improta-Barone-Scalmani-Frisch)方法得到的激发能最小, 矫正的基态反应场方法(cGSRF)得到的激发能最大. 对于光谱移动值, 3种方法与实验值相比都偏小, 线性响应方法(LR)计算出的误差最大, 而IBSF方法得到的结果与实验值最吻合, 是预测溶液中AF350分子激发能和光谱移动值最准确的方法. 对比了Marcus传统理论和基于约束平衡的非平衡溶剂化理论的结果, 发现后者得到的激发能和光谱移动值更接近于实验值.     

超重现毛细管电泳的理论与例证

毛细管电泳经常遭受结果不稳定、不重现的困扰。该文从理论上推导了一些新模式并以例证说明,这些模式能在一定条件下抵抗条件变化,获得超重现电泳谱图。它们是加权淌度谱、迁移电量谱、电荷密度谱、摩尔电荷密度谱、扩散系数谱、液相质量谱,以及它们各自的比例谱等,其中前4种为实时测量模式,其余的为实验后模式。这些模式需要发展新的仪器或算法,但都有发展潜力,值得深入研究。